Best DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit For sale

Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger.

The 20-degree angled DC618K nailer
(view larger).

DC618K 18-Volt, 16 Gauge, 20-Degree Angled Finish Nailer Kit At a Glance: Consistent nail penetration into both soft and hard joints Sequential and bump operating modes Integrated LED lights Includes one battery and 1-hour charger Three-year limited warranty; two-year free service

Power and Performance

The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use.

Comfort and Convenience

You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A 6 position dial enables you to move between applications without having to re-acquire exact depth setting. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. This nailer also includes integrated LED lights for perfect placement in low-lit or shadowy areas.

DEWALT's XRP Extended-Life Battery System

A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.

The DC618K comes with one 18-volt XRP battery and a 1-hour charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.

What's in the Box

DEWALT DC618K 20-degree angled nailer; 18-volt XRP battery; 1-hour charger; reversible belt hook; no-mar tip; safety glasses; operating instructions

The DC618K engine works as fast as you do--driving up to five nails per second (view larger).

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

DeWalt Scores First Time Out!
No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").

Just picked the nailer up August 31st from H.D...

First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.

Pro's:

* Cordless! Don't have to drag out the air compressor.

* Cool headlights. Good for doing trim in darker areas.

* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to...

Click here to read the full review for more information about this product.

it works good!
Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:>12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.
Good tool and It makes a lot of sense if you own 18V tools now
This tool is solid and works as advertised. So it weighs 8.5 lbs... if you are going to be nailing over your head for hours straight then break out the air hose. I did the same when using my Paslode.

This tool replaced my Paslode Impulse Finish nailer. I've not looked back. Ample power and drives nails well with very predictable depth control.

Get the angled nailer, easier to place and nail in tighter spots. With the size of the gun, you'll need it.

If you are looking for the possible negatives...

Somewhat costly to purchase

It is heavy, but the tool compensates me for this with performance and convenience

I miss being able to sit the tool down on the front face like the Paslode. The Dewalt rolls over sideways if you try. This makes it difficult to set it down and retrieve from the floor or a ladder shelf. I glued rubber feet to the front, problem solved.

If doing production, long nails, hard wood... keep...

Product Features :

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Contact Trip Lock-Off allows trigger to be disabled when not in use
• Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting

Rating : 4.6
List Price : $353.19

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer On Sale

Improved Reliability and Versatility

The Porter-Cable FN250C 1-to-2-1/2-inch 16-gauge finish nailer comes with a maintenance-free motor for added reliability and long tool life, with the ability to drive 16-guage "FN" style finish nails from 1 to 2-1/2 inches long. This nailer features an internal piston catch for consistent maximum power on every shot and a rear exhaust to keep contaminates away from work. Also included is a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, and a sequential style trigger with a lock off switch.

Additional Features

Other features include a contact safety located behind the driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine, which can be loaded rear load and lock style, this nailer's sequential style trigger with lock-off switch operates at 70 to 120 PSI for added versatility. The Porter-Cable FN250C's strong and lightweight die-cast aluminum body Measures 10.6 x 11.8 inches and weighs 3.85 pounds.

What's Included

The Porter-Cable FN250C comes with 1,000 16-gauge 2-inch finish nails, one 1/4-inch fitting, one pair of safety glasses, and one carrying case.

About Porter-Cable

With more than 100 years of experience producing quality and performance-driven tools, Porter-Cable is a leading manufacturer and marketer of professional-grade cordless and corded power tools, equipment, and accessories. Known for industry-changing innovation, Porter-Cable introduced the world’s first helical drive circular saw, portable band saw, and portable belt sander.

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Wow!
I love this nailer! I have several other P-C nailers that require a "drop of oil" each time it's used. This one is oil-less and I like that.

Very powerful and easy to use. Easy to adjust the nail head-height. I use it with a small Senco 1 Gal. Hot Dog compressor and works extremely well. I have larger compressors, but it works well with the small, quiet one.

Simple to insert and remove nails. Easy to see how many nails remain. No adjustment for different size nails. Nice Case.

Click here to read the full review for more information about this product.

Trigger seals leaking after minimal use
I bought this FN250c as part of the 3 gun kit from Home Depot.

I followed the directions in terms of set up, use, and minding the temperature (I used it indoors).

After a quick volley of 4 nails into pine 2x4s, the trigger seal started to leak. I had shot no more than 125 nails through it. Perhaps it needs a break in period but there is no mention of it in the manual.

As of now, the tool is still functional and the leak is very minor but I worry about it getting worse.

Otherwise, I like the way it handles, it is light. I don't like the way it loads. The plastic slide grips the nails until they are halfway up the slide and you have to push them into position. It is awkward in comparison to their older 16g nailer with the metal slide which had a spring mechanism that locked back and nails were dropped in through the top.

I bought it only a few weeks ago, so I may exchange it at Home Depot and hope for better luck or return the whole...
Easy to load, easy to use, never jams.....
I've had several 16 gauge finish nailers over the years, and this is probably my favorite of all of them. It can drive a 2.5" nail through red oak with ease and never jam. Super easy to load and oil free! Functional belt clip and light weight.....great tool all around.

Product Features :

• Maintenance-free motor designed to deliver long life
• Internal piston catch for consistent max power on every shot
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Drives 16 ga. FN style finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal
• Included with nailer: 1,000 16-guage 2-inch finish nails, 1/4-inch fitting, safety glasses, and carrying case

Rating : 3.2
List Price : $330.64

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Floor Stapler for Installing Hardwood Flooring - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring For sale

Floor Stapler for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The staple magazine holds 100 floor staples, and staple length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The floor stapler is used by placing it on the edge of a piece of hardwood floor. The included mallet is then used to strike the actuator and fire the staple in. The most difficult part of the process is just moving the floor stapler around. Include in the kit is a Carrying Case, Floor Stapler , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

great nailer
I installed a solid asian walnut floor in my living room and this nailer worked perfectly. Its a great product for the price and would recommend it.

Click here to read the full review for more information about this product.

Product Features :

• Floor stapler (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
• Operates with any standard compressor between 60-100 PSI
• High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
• Non-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
• Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.

Rating : 5.0
List Price : $249.99

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Porter-Cable PN650 Palm Nailer Kit For sale

The Porter-Cable PN650 Palm Nailer Kit is a versatile pneumatic nail gun with a comfortable design and magnetic tip. This nailer will accept 1-1/4 to 6-1/2 inch nails (3d to 70d), and it comes with four different nose tips, including finishing tip, magnetic tip, wide nail tip, and steel hammer tip. Don't worry about driving the nail too deep, the PN650 features depth-of-drive control to make sure the nail gets set correctly. The nailer operates at 50-120 PSI and features a multi-blow firing mode--2,300 BPM at 100 PSI.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Palm Nailer Kit
Since nails must be inserted one at a time, this is not the best tool for someone with thousands of a specific type of nail to drive. However, it will serve in place of an array of nail guns for those who must drive a variety of different nails. In addition, it is safer since the nails are driven by successive blows rather than shot out of a gun.

Small finishing nails go in straight and can be driven flush with the wood surface. Countersinking is not possible since the driving blade is too big and leaves a mark, but it is a simple matter to countersink them by hand. The point of each nail is placed exactly where it is supposed to go, so accuracy is very good.

The biggest nails in my shop are serrated barn nails about 8" long, and this tool drove them through a 6x6 treated beam like shoving a knitting needle through styrofoam.

The hammer tip is good for pounding anything you would normally hit with a hammer. It drives wood through my doweling plate fast and I will probably...

Click here to read the full review for more information about this product.

This thing is great!
I have always used a framing hammer to nail joist hangers and usually on every job I bang my finger once or twice while trying to hold the hanger/nail and hammer. I used this tool for the first time today and was amazed at how smooth it is. It comes with quite a few different accessories for different types of nails and it comes with an air hose connection. I had to nail one hanger with only 5 1/2" between the hanger and the adjacent wall and the palm nailer handled this easily. I was expecting this tool to be rough on the hands but was surprised at it's smoothness and tons of power. This is a tool I wish I had bought years ago.
Ease of use with prior elbow injury
I am in the midst of building a deck. I and my partner have used this palm nailer from day one of construction. It is easy to use, very controllable.
Without this palm nailer I would have blown my elbow out with a conventional hammer and nails. Each joist hanger took 6 nails
Two hangers per joist=12 nails. 28 joists x 12= 536 + nails in hangers and all went in straight and without hesitation.
To date, this is the best purchase I have made that saves wear and tear on my elbow.
I recommended this for anyone who needs to drive an enormous amount of nails, especially through joist hangers where aim is critical through pre made holes..
V.M.Steel, NY

Product Features :

• Capacity from 1-1/4-inch to 6-1/2-inch (3d to 70d)
• Comes with four different nose tips
• No Mar finish tip: for finish nail up to 3d
• Magnetic tip: for driving 3d to 16d common nails
• Standard tip: for common nails up to 70d; Steel hammer kit: for moldings, dowels, automotive body work

Rating : 4.7
List Price : $235.20

Available at Amazon : Check Saved Price Now !

Read more...