Best Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler On Sale

Hitachi N3804AB3 1-1/2-Inch 18-Gauge Narrow Crown Finish Stapler
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

soldering iron
I've used many brands of nail guns with various prices and qualities. The Hitachi Narrow Crown Finish Stapler definitely one of the best considering the low price. Light, and easy to use, it also has a switch for single shot or bump action which is wonderful. Most homeowner will feel much comfortable with single shot and able to check how many staple left with exposed rail. With a short practice, most people can gain most of the control of this staple and use it with ease. It has no problem driving 1 1/2 into wood and I felt it doesn't use much of air pressure as my compressor stay quiet longer than some other nail guns with similar capability.

The only thing I don't like is the kit does not come with sample staples and lubricant. It is not that I don't have them at home but it means the case does not design with designated places for those. minus one star for that.

Click here to read the full review for more information about this product.

Mighty Mouse
One thing I will add that the other reviewers did not mention is that this stapler packs a heck of a wallop. The power of this lightweight unit really amazed me.

The truth is, I did not know what to expect. I have never owned an air-powered stapler or nail gun. I planned to use this Hitachi stapler to put up kraft-faced insulation, and then later use it for trim work. Yeah, right. I loaded it with 0.50" staples. They went right through the paper tabs on the insulation and kept on going into the studs. I had to look hard to find them because they had been sunk so deeply.

I turned the air pressure down to 70 PSI, which is the minimum operating pressure and set the stapler's depth adjustment to minimum. No dice. Too powerful! I went back to using my Arrow T-50 Carpal Tunnel Syndrome Special.

I decided to get to know this little monster better. So I ran a test to see what it could do. I loaded it with 1.50" Senco staples and fastened a piece of...
excellent tool
The Hitach is a nice looking tool, light weight, and it is cool. When loading the bolt draws back and locks. Staples fit over the rail tightly, but slide smoothly, release button is easy to operate and positive (not sloppy).

The stapler needs at least fifty pounds of pressure, but will sink the 1.25 inch staples perfectly into pine at that setting. It uses little air, so the compressor isn't called on much.

In "automatic" bump mode this gun will shoot all day. I was stapling 3' lengths of chicken wire to a wooden frame. The gun has never jammed.

As much as I hate manual staplers, I love this tool!

It is a joy to use, and accurate. I highly recommend this tool.

Product Features :

• 1/2- to 1-1/2-inch 18-gauge narrow crown stapler with factory installed air fitting for convenience
• Selective actuation switch to choose between bump fire or sequential fire modes; tool free depth adjustment
• Tool-less, easy to clear nose for quick staple extraction; magazine holds up to 130 staples for efficiency; no-mar tip; 360-adjustable exhaust
• Includes safety glasses, air fitting, hex bar wrenches, and case
• 10.3-by-2.3-by-9.2-inches; 2.3-pounds; 5-year warranty
• 360-degree adjustable exhaust
• Comes with a 5-year limited warranty
• Easy clear nose
• No-mar tip and fitting
• Tool-free depth adjustment

Rating : 4.1
List Price : $170.52

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Stanley Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor Stapler For sale

This pneumatic hardwood-floor stapler is a compact, mallet-actuated air stapler that automatically positions and drives staples for rapid installation of hardwood flooring. It secures the flooring at the proper angle and penetration without the danger of hammer marring. By simply resting the nose of the machine squarely against the work, the direction and angle of the staple is automatically aligned. This stapler is easily adjusted to handle different flooring thickness or tongue positions. This tool has an aluminum body for job site durability and low weight, and comes with an extra-wide composite base plate for added stability. It provides 420 in./lbs. of driving power, and has an operating pressure of 60 and 100 psi. It shoots fasteners between 1-1/2 to 2 inches, and the magazine has 92 fastener capacity. The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.

The Bostitch MIIIFS Pneumatic Floor Stapler At a Glance: 420 in./lbs. of driving power High-speed, mallet-actuated operation Extra-wide base plate for stability and control Ergonomic design with elongated handle

Adaptor foot and FloorGuard graphite mallet provide stability and control. View larger.

1.5" to 2.0" staples are ideal for 0.5" to 0.75" hardwood flooring.

All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your stapling jobs quickly and easily. Just connect the Bostitch MIIIFS Pneumatic Floor Stapler to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 92-staple magazine will keep you working without interruption.

Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFS features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive staples at the proper depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade result every time.

Lightweight, Durable Construction for Everyday Use
The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this stapler will withstand the wear and tear of any jobsite.

The Bostitch MIIFS Pneumatic Floor Stapler measures 3.13 x 14.8 x 17.25 inches (WxHxL) and weighs 11.2 pounds. It is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures premium-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Stapler, FloorGuard graphite mallet, pre-finished-flooring adapter foot, and two base plates (1/2 inch and 3/4 inch).

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

A Do-it-yourself-er's Initial Thoughts
I purchased the MIIIFS stapler to lay approximately 1,700 sq. ft. of 3/4 inch red oak flooring in my new home. After installing well over 1,400 sq. ft. here are some of my observations:

1) The tool makes it very easy for a novice to put down a nice, tight hardwood floor. If the boards are laying tight an easy swing of the mallet is all it takes to fully seat a staple (more on this later). If the board is warped the MIIIFS can stand up to a solid mallet smack without any trouble. The mallet's plastic face, by the way, does not show any signs of cracking so far.

2) The stapler efficiently uses the its air so you do not need a big compressor. I have been using a 1.5 hp unit with a 6 gallon tank. Output is set at 85 psi. I doubt such a small compressor could supply two nailers simultaneously, but it handles one quite nicely.

3) The stapler did develop a small air leak near the top shortly after I began using it. The amount of leaking is small (based on psi drop at the...

Click here to read the full review for more information about this product.

Floor Stapler
I have used this tool for twelve years. I have never had a problem with it after thousands of square feet of flooring installed. I would highly recommend this product.
bostitch floor stapler
I worked in hardwood floors for five years and the bostitch floor stapler is the only dependable floor stapler I've found to hold up to the everyday use.

Product Features :

• 1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples
• High-speed, mallet-actuated operation; extra-wide composite base; 420-inch-pounds of driving power
• Constructed of aircraft-grade aluminum;-includes rubber-tipped mallet and foot kit
• This stapler is ideal when working with 1/2-inch to 3/4-inch finished or unfinished hardwood flooring
• 15 by 3-1/8 by 3-1/4; 11.2-pounds; 7-year limited warranty

Rating : 4.7
List Price : $482.72

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Floor Stapler for Installing Hardwood Flooring - Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring For sale

Floor Stapler for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The staple magazine holds 100 floor staples, and staple length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The floor stapler is used by placing it on the edge of a piece of hardwood floor. The included mallet is then used to strike the actuator and fire the staple in. The most difficult part of the process is just moving the floor stapler around. Include in the kit is a Carrying Case, Floor Stapler , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

great nailer
I installed a solid asian walnut floor in my living room and this nailer worked perfectly. Its a great product for the price and would recommend it.

Click here to read the full review for more information about this product.

Product Features :

• Floor stapler (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
• Operates with any standard compressor between 60-100 PSI
• High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
• Non-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
• Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.

Rating : 5.0
List Price : $249.99

Available at Amazon : Check Saved Price Now !

Read more...

Best Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler On Sale

The Porter-Cable US58 1/4-Inch to 5/8-Inch, 22-Gauge C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of useful features. It uses standard Senco C Type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great stapler, but a word of caution
Light and effective. It does its job as well as I could have hoped. Not a single jam that was not obviously my fault. I have spent several times the cost of this tool looking for a stapler that would do what this one does as well as it does. Why the enthusiasm? Well, most staplers not meant for construction site abuse are not very good. This one is.

A word of caution. This is not, nor was it ever intended to be, a construction stapler. The staples it is designed to use are not big enough nor thick enough to be of much use for construction site purposes. This is a professional grade upholstery stapler.

Click here to read the full review for more information about this product.

Where to get staples
This gun is very comparable to other industrial upholstery staplers in features, design and quality, but it is considerably less expensive.

Since this is an upholstery stapler you can get staples from any upholstery supply shop. A hardware store will not carry them. When you go to your local upholstery supply shop ask for staples compatible with Empire 7, BeA 71, Bostitch BA71, JK 670, Rainco 7, or Senco C series staplers. Amazon's price for replacement staples is good considering they are galvanized, but you can get liquor finish staples cheaper at your local store. Many will carry stainless steel staples as well.

This stapler does not come with a case because it is an industrial tool. Upholstery shops do not bother putting their tools in boxes at the end of the day. Also upholstery shops don't make a lot of saw dust, at least not in the fabric part of the shop. For those using this stapler in a general purpose shop, a case would be nice but, as mentioned,...
OUCH!...
I bought this stapler to re-cover the vinyl pillions and seats on my boat. And, approximately 8,000 staples later, I can say with certainty that it is definitely the ideal tool for any type of upholstery work. It's light, easy to hold, has an extended nose to get into tight spaces, and is powerful enough to completely sink the staple through several layers of fabric, even into hardwood. It's also extremely easy to re-load, and I've never experienced any type of jam or mis-fire. Construction is typical Porter-Cable (my personal favorite brand), meaning it appears to be built super tough--I expect it to last a lifetime.
So then, why only 4 stars? Unlike any other pneumatic 'nail gun' I've seen, this stapler does not have a safety tipped nose. Usually, the nose has to be pressed against something in order for the trigger to be functional. But, with this one, there is no safety tip--you just pull the trigger and it starts firing. Add to that the fact that the trigger is very...

Product Features :

• Uses standard Senco Type, 22 ga. 3/8-inch crown staples from 1/4-inch to 5/8-inch long
• Small and lightweight for ease of operation
• 1-inch nose extension for limited clearance fastening
• Steel top cap for durability
• Rear exhaust port channels air and tool oil/condensation away from user; Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open

Rating : 4.6
List Price : $162.43

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Surebonder 9615, Upholstery Stapler with Carrying Case For sale

9615 Features: -Pneumatic Fine Wire Stapler Shoots 0.25'' - 0.63'' Staples.-Upholstery Stapler 22 Gauge.-Safety mechanism that prevents accidental firing.-Quick release magazine for easy loading.-Adjustable air exhaust.-Staple viewer.-High impact carrying case.-Upholstery.-Model Number: 9615.-Compatible with:.-Capacity: 165 Staples.-Operation Pressure: 60 to 100 PSI.-Maximum Pressure: 120 PSI. Dimensions: -#300 Series Upholstery Staples(22 Gauge Wide Crown): 5/8'' long Galvanized Staple, 1/2'' long Galvanized Staple, 7/16'' long Galvanized Staple, 3/8'' long Galvanized Staple, 5/16'' long Galvanized Staple and 1/4'' long Galvanized Staple.-Dimensions: 8.9'' L x 8.1'' W x 2.2'' H.-Weight: 4.05 lbs.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Good tool, nearly useless instructions
This tool is a good value, coming in at about half the price of the others offered on Amazon. It does the job just fine, and while the fit and finish is not equivalent to higher priced tools it will give good service.

My main criticism is the manual: it is obviously written by someone whose first language is not English, important details are left out, loading instructions very ambiguous, and none of the specifications (operating pressure, staple size, etc.) are given in units that an American would understand. This is OK if sold to someone outside of the American market but potentially dangerous for those who are and can't do the conversion. Staple size is obvious because they are standard and Amazon sells the Surebonder staples (which are a good product and value as well - I bought an assortment with the staple gun). Pressure: The maximum operating pressure in the safety warning works out to about 100psi. I get great results with 1/2" staples through loose weave...

Click here to read the full review for more information about this product.

Use only Surebonder Staples
Using Crex 1/4 staples jammed the loading slide. Only one staple would feed because Crex staples clamped the slide too tightly. This staple gun worked without flaw when loaded with Surebonder staples. Very easy to load and position for upholstering a captain's chair.
Little but mighty
I love this stapler. I ordered it to do an upholstery job. My husband is in construction and has all the 'man-size' tools. His stapler wore me out and was too large to get in some of the tight spaces. This stapler is just the right size and strong enough to fire into the hardwoods. It's lightweight enough that I can use it without breaking my wrists. It's a great buy!

Product Features :

• Safety mechanism prevents accidental firing
• Quick release magazine for easy loading
• Adjustable air exhaust
• Stapler viewer

Rating : 3.4
List Price : $39.99

Available at Amazon : Check Saved Price Now !

Read more...

Cheap Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun On Sale

Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight. It comes with an extra-wide composite non-marring base plate for added stability and protection against scratches to the flooring surface. It provides a conveniently long reach handle with an ultra-padded cushioned grip for balance and optimal operating comfort, stability and safety. Internally, the driver blade is constructed of a very tough heat treated and hardened steel. The composite base plate designed to allow the user to drive fasteners much faster and closer to the wall while protecting the flooring surface from marring. This ergonomically designed multifunctional tool is manufactured under the strict ISO guidelines for quality control. With nearly 30,000 sold, this product has become a symbol for reliability and durability.The patented design of the Ramsond RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun--without changing magazines. Powered by compressed air, this tool features patented air booster chambers for maximum driving force and speed. It tackles virtually all thickness of hardwood flooring and includes a non-marring base system to protect against damage. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold.

Two-in-One Hardwood Flooring Stapler and Cleat Nailer At a Glance: Shoots staples and 'L' cleats without changing magazines Operates with compressed air (60 - 120 PSI) Non-marring base system and adjustable base plate ideal for hardwood floors Ergonomic long-reach handle with padded grip keeps you comfortable Durable, lightweight die-cast alloy and steel construction

Accepts 15.5- and 16-gauge staples from 1" to 2" and "L" cleats from 1-1/2" to 2".

The two-in-one magazine and driver system accepts both cleats and staples. View larger.

The RMM4 continuously stores compressed air in two patented air acceleration/booster chambers in the handle. View larger.

The base system has two composite disks in front, a middle guide, and a rear nylon-derivative plate. View larger.

Patented Two-in-One Magazine and Driver System
This dual-purpose tool has a patented two-in-one magazine and driver system that accommodates both cleats and staples. Designed for 15.5- and 16-gauge staples from 1 to 2 inches, and "L" cleats from 1-1/2 to 2 inches, the magazine has a 100 staple/cleat capacity. Loading the fastener is quick and easy--simply pull the magazine back, drop in the fasteners, and release the drawer--it takes less than 10 seconds.

Precise Air-Powered Operation
The Ramsond RMM4 operates with the power of compressed air (60 - 120 PSI) and is equipped with a standard 1/4-inch NPT air inlet for easy compatibility. To use, simply attach your air compressor's hose to the RMM4's air inlet, then rest the nose of the RMM4 squarely against your work surface to fire.

The direction and angle of the staple/cleat will be automatically aligned for precision driving. And with only a slight strike of the mallet upon the actuator, the RMM4 will shoot a cleat nail or staple through your flooring at the proper angle and depth.

Patented Air-Booster Chambers
Most conventional flooring nailers/staplers store compressed air within the body of the tool. Upon mallet strike, the air reserved in the body of the tool is released, driving the blade and shooting the fastener. The RMM4 takes this design one step further. In addition to storing compressed air inside its body, the RMM4 continuously stores compressed air in two patented air acceleration/booster chambers located in the handle.

By storing extra compressed air, these sealed chambers ensure that the fasteners shoot with sufficient force for perfect penetration in the flooring surface. The booster chambers also accommodate quicker retraction of the actuator and blade when compared with conventional units.

Non-Marring Base System
Featuring an adjustable non-marring base system, the RMM4 provides protection against scratches and allows you to drive fasteners fast and close to the wall. The base system is equipped with two composite disks in the front, a middle guide, and a rear nylon-derivative plate. The combination of these three mechanisms ensures that the surface of your hardwood flooring is not marred or damaged during installation. It also provides for tool balance and optimal positioning against the work surface for fast, accurate installation.

Works with Most Thicknesses of Hardwood Flooring
The RMM4 series is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates--simply install the appropriate base plate for your application.

Durable and Comfortable
With over 30,000 units sold in North America, the RMM4 is sure to deliver on its promises. Designed for long-term use, the Ramsond RMM4 is an industrial-strength power tool that's comfortable to use. Its body is constructed of a durable, lightweight die-cast alloy, and its driver blade is constructed of heat-treated hardened steel for long-lasting resilience. For user comfort, the RMM4 has a long-reach handle with a padded cushioned grip that offers increased balance and control.

The RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer is manufactured under strict ISO guidelines for quality control and safety, and it is backed by a one-year warranty.

What's in the Box
Flooring Stapler/Cleat Nailer, mallet, goggles, bottle of oil, four Allen wrenches, internal key/wrench, O-ring kit, two nylon composite base plates, and a blow-molded carrying case.

The stapler/cleat nailer, mallet, goggles, oil, and accessories store neatly in a durable carrying case.

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great tool that does it's job without much babysitting.
Was skeptical, as I usually am, but this tool lives up to its name.

Have installed alot of 3/4" 2-1/4" plank oak flooring with it so far, have had 1 misfire. Instructions say to not hit it too hard, but I found that it takes a good solid whack to get it to fire completely. Once you do that, it's a breeze. Always seats where it's supposed to, and fires the nails to the right depth. Too light a whack will not sink the nails.

It's really solidly built and balanced really nicely.

One drawback, I wish I could check magazine level without opening it up, but it's not too bad. It makes a hollower sound when you're dry firing.

Click here to read the full review for more information about this product.

Great Nailer for the Price!
As most other people who bought this flooring nailer, I couldn't justify spending 400 plus on the Bostich or Porter Cable. I don't like renting tools from the home improvement stores because I like the freedom to use the tools whenever I want so I can do the job at my own pace. I gave it 4 stars because when I first hooked up the air supply, I heard some air leaking from where the handle meets the body of the nailer. I found that some of the bolts were not fastened down all the way. I just took the wrench that was supplied and tighten the bolts and it hasn't leaked air since. The other reason for 4 stars is that the logo's and SN are just stickers, and the user manual is not that great for beginners like me. As far as the functioning of the nailer, it gets 6 stars! I put down 3/4 inch pre-finished oak floor and the RMM4 worked perfect without a single misfire! Overall, I would recommend this tool in a heartbeat, especially to those who are trying to decide whether or not to...
Good Floor Stapler
I read all the reviews and ordered the nail gun. I opened the box, oiled up the gun and off we went (boys with new toys) it worked great until I disconnected the air compressor on the 2nd day and when I hooked it back up it developed an air leak on handle the bolt where coming loose and the gasket had slipped out the side so I shoved the gasket back in and tightened all the bolts and it worked like a charm.
I'm only 200sqft into a 600sqft project, not one miss fire and the only problem I had was with the bolts being loose on handle. I would recommend this nail gun for the price, before using check all bolts, it was easy with the allen wrench right on the tool.
I gave this a 4 because the handle on the hammer is loose after 4 days of use. A little better made hammer would be nice.
Good luck!

Product Features :

• Uses both cleats and staples
• Air operated
• Includes all accessories and carrying case
• Uses l cleats and u staples
• Air booster chambers for better nail driving

Rating : 4.2
List Price : $249.99

Available at Amazon : Check Saved Price Now !

Read more...

Best Campbell Hausfeld FP209599AV 2-Gallon Mini Twin-Stack Air Compressor with 1 1/4-Inch 2-in-1 Brad Nailer / Stapler Kit On Sale

Includes 2-Gallon Twinstack Air Compressor and 2-in-1 Brad Nailer/Stapler Kit - FP209599AV, 2-in-1 Brad Nailer / Stapler, (500) Brad Nails, (500) Staples, (2) Allen Wrenches, Male Plug, 25-ft Recoil Hose, Female Coupler, Air Chuck, Inflation Needle, Inflation Needle Adapter, (2) Inflation NozzlesThe Campbell Hausfeld FP209599AV Inflation and Fastening Two-Gallon Air Compressor with Nailer Holder and Two-in-One Nailer/Stapler Kit provides everything you need for household inflation and nailing/stapling projects. This all-inclusive kit saves you time and money over electrically powered tools, takes up less space, and is ready to go right out of the box.

This versatile, high-capacity compressor is your go-to tool for over 30 inflation and fastening jobs. View larger.

FP209599AV Inflation and Fastening Air Compressor Applications: Completing over 30 inflation and fastening projects Inflating car and bike tires Inflating sports balls Upholstery Air brushing Cleaning workbench areas and equipment Installing trim Building crafts

Air Power Completes Jobs Faster and Less Expensively
Whether you're a do-it-yourselfer working around the house or in your garage, you'll complete home repair and tire inflation jobs faster and less expensively with the FP209599AV Inflation and Fastening Two-Gallon Air Compressor with Nailer Holder and Two-in-One Nailer/Stapler Kit.

With this air compressor, you will be able to reap the benefits of inflation tools and air-powered fastening tools. Compared to electrically powered tools, air tools have significantly lower initial costs and notably longer lifespans. They also deliver more torque and higher RPM than their electric counterparts, which means they'll help you get your work done more efficiently.

Perfect for a Wide Range of Applications
The FP209599AV Compressor is ideal for over 30 inflation and fastening projects, including inflating car and bike tires, inflating sports balls, installing trim, air brushing, and cleaning your workbench area.

Arriving with seven-piece accessory kit and hose, the FP209599AV Compressor has everything you need to get started on your next job.

Designed with You in Mind
Designed to be user-friendly, the FP209599AV Compressor is a compact tool that's easy to store and move. Complete with two one-gallon tanks for greater stored air power, the oil-free compressor has an easy-carry, twin-stacked tank design

For further convenience, easy-to-read gauges are conveniently located on the compressor body for quick, accurate air pressure monitoring. Additionally, an on-board holder keeps the included nailer close at hand.

Bonus Nailer/Stapler
In addition to a compressor, the FP209599AV Kit comes with the 323200AV Nailer/Stapler, which holds 100 brad nails or staples and uses 18-gauge 1/2- to 1-1/4-inch nails. This handy tool is ideal for woodworking and furniture building, and is perfect for installing trim and building crafts such as picture frames.

The Inflation and Fastening Two-Gallon Air Compressor with Nailer Holder and Two-in-One Nailer/Stapler Kit is backed by a one-year warranty.

About Campbell Hausfeld: Making it Easier to Do it Like a Pro!
Campbell Hausfeld makes it easier for you to finish your projects like a pro. The company's history of creating quality products began in 1836, when it manufactured horse-drawn wagons and agricultural equipment. Today, the company offers a complete line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects faster and easier with Campbell Hausfeld.

What's in the Box
Compressor; 25-foot recoil hose; two male plugs; air chuck; inflation needle; inflation needle adapter; two inflation nozzles; 2-in-1 nailer/stapler; brad nails; staples; two Allen wrenches; coupler; and plug.

The compressor easily inflates items such as tires and sports balls, while the bonus nailer/stapler comes in handy for trim, upholstery, and air brush work. (Click images above to view larger.)

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

My Solution to Canned Air
I was tired of throwing money away on canned air so I bought this Campbell Hausfeld 2 Gallon Mini Twin-Stack Air Compressor. A lot of people thought I was nuts, but then let's do the math....a can of air nowadays costs roughly $6 and I go through at least one a week times that by 52 weeks and you have $312. So in about five months time this compressor will have paid for itself.

The included nail/stapler gun does an excellent job. Just keep in mind that the gun which comes with this compressor is a simple brad nailer fit for doing jobs such as hanging thin sheets of paneling. The step up from that would be a finish nailer, which you would use that for nailing molding. The step above that would be a framing nailer and those are usually 3

Read more...