Amazon_Gift_Card

Monday, February 11, 2013

DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit

Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger.

DEWALT DC618K
The 20-degree angled DC618K nailer
(view larger).
At a Glance
DC618K 18-Volt, 16 Gauge, 20-Degree Angled Finish Nailer Kit At a Glance:
  • Consistent nail penetration into both soft and hard joints

  • Sequential and bump operating modes

  • Integrated LED lights

  • Includes one battery and 1-hour charger

  • Three-year limited warranty; two-year free service
At a Glance

Power and Performance

The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use.

Comfort and Convenience

You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A 6 position dial enables you to move between applications without having to re-acquire exact depth setting. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. This nailer also includes integrated LED lights for perfect placement in low-lit or shadowy areas.

DEWALT's XRP Extended-Life Battery System

A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.

The DC618K comes with one 18-volt XRP battery and a 1-hour charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.

What's in the Box

DEWALT DC618K 20-degree angled nailer; 18-volt XRP battery; 1-hour charger; reversible belt hook; no-mar tip; safety glasses; operating instructions

DEWALT DC618K
The DC618K engine works as fast as you do--driving up to five nails per second (view larger).

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

DeWalt Scores First Time Out!
No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").

Just picked the nailer up August 31st from H.D...

First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.

Pro's:

* Cordless! Don't have to drag out the air compressor.

* Cool headlights. Good for doing trim in darker areas.

* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to...

Click here to read the full review for more information about this product.


it works good!
Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:>12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.
Good tool and It makes a lot of sense if you own 18V tools now
This tool is solid and works as advertised. So it weighs 8.5 lbs... if you are going to be nailing over your head for hours straight then break out the air hose. I did the same when using my Paslode.

This tool replaced my Paslode Impulse Finish nailer. I've not looked back. Ample power and drives nails well with very predictable depth control.

Get the angled nailer, easier to place and nail in tighter spots. With the size of the gun, you'll need it.

If you are looking for the possible negatives...

Somewhat costly to purchase

It is heavy, but the tool compensates me for this with performance and convenience

I miss being able to sit the tool down on the front face like the Paslode. The Dewalt rolls over sideways if you try. This makes it difficult to set it down and retrieve from the floor or a ladder shelf. I glued rubber feet to the front, problem solved.

If doing production, long nails, hard wood... keep...
DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit
Product Features :
  • Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
  • Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
  • Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
  • Contact Trip Lock-Off allows trigger to be disabled when not in use
  • Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting

Rating : 4.6
List Price : $353.19

Available at Amazon : Check Saved Price Now !


0 comments:

Post a Comment