This pneumatic hardwood-floor stapler is a compact, mallet-actuated air stapler that automatically positions and drives staples for rapid installation of hardwood flooring. It secures the flooring at the proper angle and penetration without the danger of hammer marring. By simply resting the nose of the machine squarely against the work, the direction and angle of the staple is automatically aligned. This stapler is easily adjusted to handle different flooring thickness or tongue positions. This tool has an aluminum body for job site durability and low weight, and comes with an extra-wide composite base plate for added stability. It provides 420 in./lbs. of driving power, and has an operating pressure of 60 and 100 psi. It shoots fasteners between 1-1/2 to 2 inches, and the magazine has 92 fastener capacity. The Bostitch MIIIFS Pneumatic Floor Stapler lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives staples into both unfinished and prefinished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.
| ||||
|
 Adaptor foot and FloorGuard graphite mallet provide stability and control. View larger. |
 1.5" to 2.0" staples are ideal for 0.5" to 0.75" hardwood flooring. |
Harness the power of compressed air and complete your stapling jobs quickly and easily. Just connect the Bostitch MIIIFS Pneumatic Floor Stapler to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 92-staple magazine will keep you working without interruption.
Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFS features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive staples at the proper depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade result every time.
Lightweight, Durable Construction for Everyday Use
The MIIIFS Pneumatic Floor Stapler's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this stapler will withstand the wear and tear of any jobsite.
The Bostitch MIIFS Pneumatic Floor Stapler measures 3.13 x 14.8 x 17.25 inches (WxHxL) and weighs 11.2 pounds. It is covered by a seven-year limited warranty.
About Bostitch
Stanley-Bostitch manufactures premium-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.
What's in the Box
Stapler, FloorGuard graphite mallet, pre-finished-flooring adapter foot, and two base plates (1/2 inch and 3/4 inch).
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
A Do-it-yourself-er's Initial Thoughts
I purchased the MIIIFS stapler to lay approximately 1,700 sq. ft. of 3/4 inch red oak flooring in my new home. After installing well over 1,400 sq. ft. here are some of my observations:
1) The tool makes it very easy for a novice to put down a nice, tight hardwood floor. If the boards are laying tight an easy swing of the mallet is all it takes to fully seat a staple (more on this later). If the board is warped the MIIIFS can stand up to a solid mallet smack without any trouble. The mallet's plastic face, by the way, does not show any signs of cracking so far.
2) The stapler efficiently uses the its air so you do not need a big compressor. I have been using a 1.5 hp unit with a 6 gallon tank. Output is set at 85 psi. I doubt such a small compressor could supply two nailers simultaneously, but it handles one quite nicely.
3) The stapler did develop a small air leak near the top shortly after I began using it. The amount of leaking is small (based on psi drop at the...
Click here to read the full review for more information about this product.
Floor Stapler
I have used this tool for twelve years. I have never had a problem with it after thousands of square feet of flooring installed. I would highly recommend this product.
bostitch floor stapler
I worked in hardwood floors for five years and the bostitch floor stapler is the only dependable floor stapler I've found to hold up to the everyday use.
Product Features :
- 1-1/2-inch to 2-inch pneumatic flooring stapler for driving flooring staples
- High-speed, mallet-actuated operation; extra-wide composite base; 420-inch-pounds of driving power
- Constructed of aircraft-grade aluminum;-includes rubber-tipped mallet and foot kit
- This stapler is ideal when working with 1/2-inch to 3/4-inch finished or unfinished hardwood flooring
- 15 by 3-1/8 by 3-1/4; 11.2-pounds; 7-year limited warranty
Rating : 4.7
List Price : $482.72
0 comments:
Post a Comment