No need to buy a brad nailer and a crown stapler separately, this super-versatile nailer/stapler tool packs two tools into one handy unit. Perfect for crafts, paneling, nailing finish and trim, cabinetry and more, this tool let’s you swap nails for staplers rather than disconnecting and connecting a new tool to the compressor. In nailer mode, the unit drives brads up to a 1-5/8 inches in length for anything from stair construction to cabinet work. The stapler mode fires 18-gauge, 1-1/2-inch finish staples for easy furniture upholstering and craftwork. An adjustable depth guide sets staples and brads to desired depths quickly and conveniently. And, tool-free adjustable exhaust easily directs exhaust away from the user. --Brian D. Olson
What’s in the Box
¼-inch air fitting, 1,000 2-inch brad nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Not a woodworker's tool....
I bought the Stanley SB2IN1 in early January because it could shoot both brads down to 5/8" and staple, giving me more versatility in my shop. Hindsight being 20/20, I wish I would have spent the extra money up front for a good stapler and a good brad nailer. The cylinder wouldn't seal when you hooked it up to an air hose, and I would have to continually hook it up/disconnect it until it would finally seal. The other problem, and it might be related, is that even when I put the compressor at the max pressure (100psi) it wouldn't countersink staples even in 1/2" plywood. The last problem is that if you could get it to countersink a brad, the footprint is the size of a staple. Leaving an ugly mark on your project. I returned the tool and am ordering a separate stapler and brad nailer.
Click here to read the full review for more information about this product.
Not a woodworkers tool is right !!!
I strongly agree with reviewer,Jonathan Ness about this product. I purchased the Stanley SB2IN1 because it could shoot both brads and staples, giving me the versatility and saving me the cost of two tools. When I put the compressor at max pressure (100PSI) it wouldn't countersink nails or staples even in pine. If you could get it to countersink a brad, the footprint is the size of a staple. Leaving an ugly mark on your project that require additional finishing. I contacted Stanley Bostitch and they told me that they knew of this problem and to get it to countresink, increase the pressure to 120 PSI (however I think the seals will wear out much faster).This is fine for staples but still leaves the ugly mark when using brads.They also told me that this is the problem with a combination tool. If I could return this tool I would...I will use this tool for stapling only and purchase a Porter Cable Brad Nailer, also the brads are much easier to find for the Porter Cable than the Stanley...
Didn't work well as a stapler.
I bought this 2-in-1 for convenience (it's a 2-in1!) and because of a very good past history with other Stanley-Bostitch tools. I was sorely disappointed. I tried to use this to staple 1/4" underlayment, but encountered numerous jams, misfeeds and situations where one of the two legs of the stapler would not sink. All-in-all, of the 200 staples I tried to sink, I had 30+ 'mis-fires'; or ~16%. I tried varrying the pressure between 80-110 psig (even though the tool is clearly marked do not exceed 100 psig) but the problem never got better. Every 5th or 6th staple would be a problem. Clearly, this is not good. I was left with no other option but to return it (and used my neighbor's Porter Cable to finish the job). I've never had a problem with my brad-only tool Bostitch, so either I got a bad one or this is a bad design. I can't recommend this item.
Product Features :
- 5/8- to 1-5/8 18-gauge brad nailer and 1/2- to 1-1/2-inch 18 crown staple combo tool
- Adjustable depth dial; tool-free directional exhaust; 135-inch-pounds driving power
- Nail lock-out feature eliminates dry firing; magazine holds 100 nails
- Includes 1/4-inch air fitting, 1,000 1 5/8-inch nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil
- Measures 9-1/4-inches (length); weighs just 2.6-pounds; 7-year warranty
Rating : 3.1
List Price : $209.90
0 comments:
Post a Comment